Notify me when the price drops
We will email you if we find a lower price on this product!
Q & A:
🛑1. Require air compressor?
Dear customer, please check your air compressor specification before purchase, the air pressure must be 6 bar(87psi) or higher, the storage tank must be 300L(34.34 gallons), and the power of air compressor is 7.5KW
🛑 2. How to connect my device to the air compressor?
The kit includes an air connection hose that connects to the compressor in 1/2 size. Please note that you must connect this air hose directly to your compressor, the use of additional adapters is prohibited!
👍3. Where do you recommend I buy dry ice?
For dry ice to be effective, we recommend that you purchase dry ice from your local market. Here is the link to purchase dry ice https://www.dryicedistribution.com/dry-ice-pellets/
4. What is the size of the dry ice pellets?
The size of dry ice pellets used in this machine is 3mm, please use the equipment strictly according to the requirements of this equipment.
5. How much dry ice do I need to clean my car's engine?
A: The amount of dry ice consumed depends on the cleaning requirements. For a typical engine cleaning, 3-5 kilograms of dry ice is required for a 4-cylinder engine and 4-6 kilograms of dry ice is required for an intake valve cleaning.
6.How much dry ice do I need to buy?
A: I recommend that you purchase 10kg of dry ice at a time and do not store it for more than 3 days as dry ice tends to sublimate and can affect the cleaning results.
Operating Instructions
Equipment debugging
Connect the host to the external air source and external power supply. Check whether the data of the air pressure indicator is normal and whether the power connection is normal (make sure the power supply is grounded normally).
Make preparations for testing machine, including connecting the machine and accessories properly, checking whether the parts are loose, and cleaning the unnecessary items placed on the machine body or the work area.
Turn on the power switch, then turn it to start mode first. And then press the start switch on the handle to run, adjust the dry ice volume from 0 to its maximum, check whether there is any abnormality, and then put dry ice materials into the machine for trial operation.
Adjusting the volume of dry ice blasting
Add an appropriate volume of dry ice and cover the lid. According to the required cleaning degree, turn the dry ice volume adjusting controller to achieve the best effect as needed (it is recommended to set it to “5” first and adjust it according to the cleaning effect).
If the barrel with smaller inner diameter is adopted, it is recommended to set it to “3” and then increase it as appropriate.
After confirmation, align the spray gun with the parts to be cleaned, and press the start switch on the handle to enter the cleaning procedure.
Final work
Turn the dry ice volume adjusting controller to “0” and start the spray gun to spray for 30-50s until no water is sprayed. The dry ice residue can be removed by extending the product’s spraying time, and manual cleaning is required if necessary. Turn off the power switch, disconnect the air source, and store the spray gun and accessories.
Package details
1pc* AUTOOL HTS705 Dry Ice Blasting machine main unit
1pc* Intake hose (Connect to external air source)
1pc* Ice outlet pipe (With signal line and switch)
2pcs* Fuses
1pc* Gloves
2pcs* Ground clip wire
1pc* Ground wire connector
4pc* Ice spray nozzle
1pc* Ice shovel
1pc* Safety goggles
1pc* Earplugs
1pc* User manual